How to Fix a Broken Screen on a 4GS

You will have to pay for the damage. Of course, Apple would perform quality repairs on your phone, but the charges are too high, up to $200 in some cases. As a result, those that suffer such damages opt to buy a new one instead and deem their iPhone totaled.

These are the factors that often confuse people when their iPhone screens are damaged. Some users simply discard the devices and wait for the new model instead of getting the existing one repaired. But if you want to get the screen replaced, you can always take your phone to an authorized Apple repair center.

There is, however, a third option as well. You can fix your iPhone 4GS screen on your own. Yes, this may sound intimidating, but it is not impossible. If you just get the right equipment and follow instructions thoroughly, you will fix it without having to spend hundreds of dollars.

In order to replace your broken screen, you need some equipment. There are a lot of DIY kits available in the market specially designed for repairing the iPhone 4GS. Be very careful when purchasing these kits since usually they are non-refundable.

Moreover, do not go for expensive kits under the impression that the cheaper ones maybe of a low quality. Once you have the kit, make a proper working space for yourself with the right amount of lighting.

Make sure that the surface you work on is flat and most importantly, clean. Lay your phone on the table, its back facing upwards. You will find 2 screws near the USB port. Use a # 00 Philips screwdriver to unscrew them.

With a pry tool, remove the screen. You can even use a thin knife blade for this purpose. The screen will be connected to some cables and you should be really careful while removing it. A great way to remove the screen without using force is to use suction cups.

You will also notice that the frame and screen are linked with some flaps that need to be lifted as well. Once you do so, 6 screws will become exposed. Once again, use the double zero screwdriver to unwind them.

Since in the LCD is sensitive, you will have to remove the assembly before removing and replacing the glass. Once the LCD is removed, start lifting the old screen. The remaining glass pieces can be removed, slowly, using tweezers or any other scraping tool.

Once the broken screen is completely removed, insert the new one with the same gentleness. Once the screen is firmly fixed, start screwing the phone in the exact same order as you opened it. Your iPhone 4GS should now be as good as new!

If you're looking to Repair an iPhone Screen or maybe buy a Used iPhone 4 OldAppleStore.com is a great place to look!

View the original article here

Read More

How to Fix a Broken Screen on an iPhone 3GS

Cover the Screen
The first thing you should do in case of a broken iPhone 3GS screen is to cover it with a scratch resistant film, such as the ScratchStopper for Artwizz which is specifically designed for iOS apps. This will prevent the screen from further damage as well as help you to avoid any contact with the broken glass.

Get the Parts
You will need a new screen with adhesive to fix it in place. Buy the iPhone 3G Digitizer and front glass that comes with an adhesive kit. Purchase this yourself from a repair store instead of ordering via phone or the internet.

Ordering will cost you about $119 on these materials where as purchasing from a physical outlet costs almost half of this amount. Considering that official iOS repair will cost you $199, it will be better for you to avoid ordering to make substantial savings, otherwise get it repaired from the App Store itself.

You will also need to something to open your iPhone 3GS, such as a case opener. Finally, you need a screwdriver with a fine point to open the tiny screws. A number 0000 Philips head is preferable for this purpose.

Note: Since you are working with small tools on a small machine, you need to be a slow as possible in your working in order to accomplish the task without any complications.

Unbolt the Casing
Turn off the iPhone 3GS and remove the SIM card. Now remove the 2 screws on the bottom. This will take some effort and you will also need a tool to separate the metal frame. When pulling up the screen, be as careful as possible, because it is connected with cables.

Next, remove the base with a small pry tool or your fingers. After removing connectors 1 and 2, use the same tool to flip the handle and remove the ribbon from connector 3.

Take out the LCD Assembly
Open the black tape on the edges of the frame. You can use tweezers to do this. Next, open the 5 screws in front of you, along with the one on top of the assemblage alongside the connecting cables. Be as gentle as possible to remove the LCD, and it will automatically slide out.

Remove the Broken Glass
This is the most complex part. Use any sharp tool to remove the glass as cautiously as possible. Since it is broken, the screen will not come out in a single piece and you will need to remove the remaining pieces as well.

Fix in the New Screen
To bring in the replacement, discard the old adhesive completely and bring in the new double-sided adhesive on the frame. Remove the backing. Insert the new glass, ensuring that the cables pass through the gap in the frame.

Finally, reassemble the phone by simply reversing the steps used to open it. Your iPhone is now restored!

If you're looking for iPhone 3GS Screen Repair or maybe a Used iPhone 3GS OldAppleStore.com is a great place to start!

View the original article here

Read More